18082

18082

1-58" to 8-34" board widths
14" depth

 

 width=

Attachment to Formwork

Form liners can be mounted to their forms with drywall screws either through the face or the back of the liner. Plywood embedded T-nuts are available on urethane liners. For optimal results, follow the full instructions in the application guide.

Form Release

Form release should be applied on all form liners. A VOC compliant, vegetable oil based, release should be tested on the liners before the wall is cast.

Technical Support

Call Fast Formliners at (636) 322-0080 or send us an email.